NUM 1020/1040/1060M G codes for cnc machinists who work on cnc mill with NUM cnc controls.
NUM 1020/1040/1060 Documentation Structure User Documents These documents are designed for use of the CNC. NUM OPERATOR MANUAL M / W 938821 NUM OPERATOR MANUAL T / G 938822 NUM PROGRAMMING MANUAL M 938819 NUM PROGRAMMING MANUAL T 938820 Integrator Documents These documents are designed for setting up the CNC on a machine. NUM 1060 INSTALLATION. NUM 1020/1040 INSTALLATION AND COMMISSIONING MANUAL /2-E1 2en-938938/2-E1 Despite the care taken in the preparation of this document, NUM cannot guarantee the accuracy of the information it contains an d cannot be held responsible for any errors therein, nor for any damage which might result from the use or application of the document. CNC Software - Any type of HMI can be developed according to customer specifications. The standard HMI for NUM CNC systems provides comprehensive functions for operating a wide variety of machines. The 3D simulation it features ensures the operator can maintain an overview at all times, even of hidden processes. CNC Software - Any type of HMI can be developed according to customer specifications. The standard HMI for NUM CNC systems provides comprehensive functions for operating a wide variety of machines. The 3D simulation it features ensures the operator can maintain an overview at all times, even of hidden processes.
Num 1020 Cnc Manual Instructions
NUM 1020/1040/1060M G-Codes
Num 1020 Cnc Manual Instructions
| G Code | Description |
|---|---|
| G00 | High-speed linear interpolation |
| G01 | Linear interpolation at programmed feed rate |
| G02 | Clockwise circular interpolation at programmed feed rate |
| G03 | Counterclockwise circular interpolation at programmed feed rate |
| G04 | Programmable dwell |
| G06 | Spline curve execution command |
| G09 | Accurate stop at end of block before going to next block |
| G10 | Interruptible block |
| G12 | Overspeed by handwheel |
| G16 | Definition of tool axis orientation with addresses P, Q, R |
| G17 | XY plane selection |
| G18 | ZX plane selection |
| G19 | YZ plane selection |
| G23 | Circular interpolation defined by three points |
| G29 | 3D tool correction (3 axes or 5 axes) |
| G31 | Thread chasing cycle |
| G40 | Tool radius offset (cutter compensation) cancel |
| G41 | Left tool radius offset (cutter compensation) |
| G42 | Right tool radius offset (cutter compensation) |
| G43 | 3D correction with cylindrical tool |
| G45 | Simple pocket cycle |
| G46 | Pocket or facing cycles with any contours |
| G48 | Spline curve definition |
| G49 | Spline curve deletion |
| G51 | Mirroring |
| G52 | Programming of movements in absoluted dimensions with reference to the measurement origin |
| G53 | DAT1 and DAT2 offset cancel |
| G54 | DAT1 and DAT2 offset enable |
| G59 | Programme origin offset |
| G70 | Inch data input |
| G71 | Metric data input |
| G73 | Scaling factor cancel |
| G74 | Scaling factor enable |
| G75 | Emergency retraction subroutine declaration |
| G76 | Transfer of the current values of «L» and «E» parameters into the part programme |
| G76+/- | ISO programme or block creation/deletion |
| G77 | Unconditional branch to a subroutine or block sequence with return |
| G77 -i | Call of a subroutine return block |
| G78 | Axis group synchronisation |
| G79 | Conditional or unconditional jump to a sequence without return |
| G79+/- | Temporary suspension of next block preparation in a sequence with movements |
| G80 | Canned cycle cancel |
| G81 | Centre drilling cycle |
| G82 | Counterboring cycle |
| G83 | Peck drilling cycle |
| G84 | Tapping cycle |
| G84 | Rigid tapping cycle |
| G85 | Reaming cycle |
| G86 | Boring cycle with indexed stop and clearance at hole bottom |
| G87 | Drilling cycle with chip breaking |
| G88 | Boring and facing cycle |
| G89 | Boring cycle with dwell at hole bottom |
| G90 | Programming in absolute dimensions with respect to the programme origin |
| G91 | Programming in incremental dimensions with respect to the start of the block |
| G92 | Programme origin preset |
| G92 R | Programming of the tangential feed rate |
| G93 | Feed rate expressed as inverse time (V/L) |
| G94 | Feed rate expressed in millimetres, inches or degrees per minute |
| G95 | Feed rate expressed in millimetres or inches per revolution |
| G97 | Spindle speed expressed in revolutions per minute |
| G104 | 3D curve smoothing |
| G997 | Enabling and execution of all the functions stored in state G999 |
| G998 | Enabling of execution of part of the functions processed in state G999 |
| G999 | Suspension of execution and forcing of block concatenation |